.png?width=100&auto=webp&quality=80&disable=upscale "Picture of John Savill")
.png?width=400&auto=webp&quality=80&disable=upscale "John Savill")
Sign up for the ITPro Today newsletter
Stay on top of the IT universe with commentary, news analysis, how-to's, and tips delivered to your inbox daily.
SDNv2 deployment with VMM the right way
Deploy SDNv2 the right way with VMM!
John Savill
February 12, 2017
1 Min Read
Q. When deploying SDNv2 with Virtual Machine Manager should I deploy manually or use the VMM SDN Express?
A. There are two methods to deploy SDNv2 with System Center Virtual Machine Manager 2016 as the management plane:
Install and configure using the various service templates for the Network Controller, Software Load Balancer and Gateway as documented at https://technet.microsoft.com/en-us/system-center-docs/vmm/scenario/sdn-overview and https://blogs.technet.microsoft.com/larryexchange/2016/05/30/step-by-step-for-deploying-a-sdnv2-using-vmm-part-1/
Deploy using VMM SDN Express which uses the VMM PowerShell but enables a single configuration file to be used which then via the script performs the complete deployment very simply. This is documented at https://technet.microsoft.com/en-us/system-center-docs/vmm/scenario/sdn-powershell
My guidance is to use the VMM SDN Express as the manual deployment is very complex and very error prone and its likely something you will only do once. With the VMM SDN Express the configuration is simple (a sample is provided) and ensures a consistent deployment and if problems occur all changes are rolled back and you can simply rerun the configuration file.
About the Author
You May Also Like
.jpg?width=700&auto=webp&quality=80&disable=upscale)
